Untersuchungen an Hydriden im Bereich der Phase Ti2CO1—x Fe x (x=0–0,5)

The hydrogen absorption of the phase Ti₆₄Co_32–x Fe _x (x=0...16) and its influence on the magnetic properties have been investigated. Measurements of the vapour-pressure, wide-line NMR and magnetic susceptibility have been performed. Substitution of Co by Fe does not change the amount of absorbed hydrogen. However the reaction rate of hydriding process, the activation energy of diffusion and the magnetic quantities change upon this substitution.

     

Computations in choice groupoids

Defining achoice as a mapping of the subsets of a setX into their respective subsets, a one-to-one (and naturally) corresponding binary operation,sequential choice, is identified under which the power set ofX is closed as achoice groupoid. A complete logical diagram is given, exhibiting all the implications between conjunctions of the seven conditions: (1) idempotence, (2) consistency, (3) absorbence, and (4) homomorphism of a choice, and (5) commutativity, (6) associativity, and (7) path-independence of the corresponding sequential choice.     

Dichloracetylen als stabiler Komplexligand Die Kristallstruktur von PPh4[WCl5(C2Cl2)] · 0,5 CCl4

Dichloro Acetylene as Complex Ligand. Crystal Structure of PPh₄[WCl₅(C₂Cl₂)] · 0.5 CCl₄ Tungsten hexachloride and dichloro acetylenediethyletherate react in boiling CCl₄ in presence of C₂Cl₄ as reducing agent forming [Et₂O · WCl₄(C₂Cl₂)]. In vacuo the complex looses ether giving the dichloro acetylene complex [WCl₄(C₂Cl₂)]₂ which is dimeric with chloro bridges. Both complexes react with tetraphenylphosphonium chloride to form PPh₄[WCl₅(C₂Cl₂)] which is equally prepared by ligand exchange of PPh₄[WCl₅(C₂I₂)] with silver chloride. All dichloro acetylene complexes are red to brown crystalline solids sensitive to moisture, and are thermally and mechanically very stable compared with the highly explosive dichloro acetylene. The compounds are characterized by their i.r. spectra; [Et₂O · WCl₄(C₂Cl₂)] was additionally investigated by ¹³C-nmr spectroscopy. PPh₄[WCl₅(C₂Cl₂)] · 0.5 CCl₄ formes dark brown crystals; according to the structural investigation by X-ray diffraction methods the compound crystallizes orthorhombic in the space group Pbca with 8 formula units per unit cell (1317 observed, independent reflexions, R = 0.049). The cell dimensions are a = 1702 pm, b = 1675 pm and c = 2228 pm. The compound consists of [WCl₅(C₂Cl₂)]? anions and PPh₄⊕ cations including CCl₄ molecules without bonding interactions. The tungsten atoms are seven-coordinated by five chlorine atoms and two carbon atoms. The dichloro acetylene ligand is bonded symmetrically side-on and has a C? C bond length of 128 pm. The W? C distances are 201 pm, the four equatorial Cl atoms have W? Cl bond lengths of 234 pm whereas the chlorine atom in trans-position to the W? C₂ group is situated in a distance of 244 pm.     

Stereocontrolled synthesis of the DE ring system of the marine alkaloid upenamide

[reaction: see text] A stereocontrolled synthesis of the DE fragment (2) of the marine alkaloid upenamide (1) is described. The synthesis proceeds in 12 steps from caprolactone (10) and 20-25% overall yield.     

Solution NMR techniques for large molecular and supramolecular structures

Transverse relaxation-optimized spectroscopy (TROSY) or generation of heteronuclear multiple quantum coherences during the frequency labeling period and TROSY during the acquisition period have been combined either with cross-correlated relaxation-induced polarization transfer (CRIPT) or cross-correlated relaxation-enhanced polarization transfer (CRINEPT) to obtain two-dimensional (2D) solution NMR correlation spectra of (15)N,(2)H-labeled homo-oligomeric macromolecules with molecular weights from 110 to 800 kDa. With the experimental conditions used, the line widths of the TROSY-components of the (1)H- and (15)N-signals were of the order of 60 Hz at 400 kDa, whereas, for structures of size 800 kDa, the line widths were about 75 Hz for (15)N and 110 Hz for (1)H. This paper describes the experimental schemes used and details of their setup for individual measurements. The performance of NMR experiments with large structures depends critically on the choice of the polarization transfer times, the relaxation delays between subsequent recordings, and the water-handling routines. Optimal transfer times for 2D [(15)N,(1)H]-CRIPT-TROSY experiments in H(2)O solutions were found to be 6 ms for a molecular weight of approximately 200 kDa, 2.8 ms for 400 kDa, and 1.4 ms for 800 kDa. These data validate theoretical predictions of inverse proportionality between optimal transfer time and size of the structure. The proton longitudinal relaxation times in H(2)O solution were found to be of the order of 0.8 s for structure sizes around 200 kDa, 0.4 s at 400 kDa, and 0.3 s at 800 kDa, which enabled the use of recycle times below 1 s. Since improper water handling results in severe signal loss, the water resonance was kept along the z-axis during the entire duration of the experiments by adjusting each water flip-back pulse individually.     

A facile retro-ene reaction of 5-(methoxyamino)-3-aryl-1,3,4-oxadiazol-2(3H)-ones

5-(N-Methoxy-N-methyl)amino-3-aryl-1,3,4-oxadiazol-2(3H)-ones 3 undergo a heteroretro-ene reaction in refluxing methanol in which the leaving enophile is formaldehyde. The resulting 5-(methylimino)-3-aryl-1,3,4-oxadiazolidin-2-one 4 may be viewed as a kinetic product which tautomerizes to the more stable 5-(methylamino)-3-aryl-1,3,4-oxadiazol-2(3H)-one 5 as the thermodynamic product. Comparison of calculated reaction energies reveals that the presence of the heterocyclic ring facilitates the retro-ene reaction, but the expulsion of formaldehyde is predicted to be highly exothermic even in its absence.     

Bromination of 2,1,3-benzothiadiazoles

The bromination of 2,1,3-benzothiadiazoles in 47% hydrobromic acid at elevated temperature has led to a general preparative method for the synthesis in high yield of otherwise difficulty accessible brominated 2,1,3-benzothiadiazoles. The typical addition reaction is apparently eliminated under these reaction conditions and substitution takes place exclusively. Bromination of 2,1,3-benzothiadiazole occurs successively at positions 4 and 7. 4-Substituted 2,1,3-benzothia-diazoles are selectively brominated at position 7. 5-Bromo- and 5-methyl-2,1,3-benzothiadiazole are brominated consecutively at positions 4 and 7.     

Ab-initio-Berechnungen des π-Bindungsbeitrages in BF3 und BCl3

Ab initio gradient calculations were performed on BF₃ and BCl₃ to evaluate the -contribution in these compounds. The influence of the basis set on the results is studied for borontrifluoride. For the chlorine compound the -contribution is smaller than for the fluorine compound.

     

Development of an ethanol-selective optode membrane based on a reversible chemical recognition process

Lipophilic trifluoroacetophenone derivatives incorporated in plasticized PVC membranes are able to selectively extract water and alcohols from the sample solution into the organic membrane phase, reversibly forming hydrates and hemi-acetals, respectively. Since this is accompanied by a change in the absorption spectrum of the acetophenone isologue, the chemical recognition process can directly be translated into an optical signal. With N-acetyl-N-dodecyl-4-trifluoroacetylaniline (ETH 6022) as the electrically neutral, lipophilized carrier ethanol can be determined from 0.5 to 35% (v/v) in aqueous solutions. The calibration curve for different ethanol-water mixtures shows a good correlation with the mathematically derived formalism and thus confirms the theoretically expected behavior. Besides high reproducibility of the optical signals, very short response times of less than 30 s were realized. The optode membrane presented exhibits a preference for ethanol compared to water by a factor greater than 11. The selectivities for several primary alcohols, such as methanol, ethanol, 1-propanol and 1-n-butanol, are comparable, but isopropanol and tert.-butanol are rejected by a factor of about 10. The alcohol concentration in different beverages was determined to evaluate the reliability of the system. The values obtained for wine, beer and different spirits show an excellent correlation with those obtained by a conventional approach involving distillation and density measurements. A residual standard deviation of ± 0.27% (v/v) over the 0.7–40% (v/v) range was found.     

The Total Synthesis of (±)-Isocomene by an Intramolecular Ene Reaction. Preliminary communication

The racemic sesquiterpene isocomene ( 1 ) has been synthesized starting from 1,7-octadien-3-one ( 2 ) in a stereoselective manner (Scheme 2). In the key step 4 → 5 the C(7), C(8)-bond was formed by an intramolecular thermal ene reaction. Further elaboration of 5 involved the ring contraction 6 → 7 , the elimination 8 → 9 and the final olefin isomerization 9 → 1 .